DESCRIPTION:

1/8 npt male to 6an male 90 degree fitting to 6an female on hose in lower diff cover (make this as low as possible) >

hose from 6an female to Earls inline screen filter 6an in and out ( I used a 12an in and out filter because I had it laying around) >

6an female to filter and 6an female out of filter to hose adapter to run bigger hose, 6 an female to 1/2 hose fitting

(Important! 6an 3/8 hose will not fit the inlet of the pump. You need to step up the hose size to 1/2 for the pump. Learned this the hard way!) > Hose into pump with a hose clamp.

Fuel Pump > 12 mm X 1.5 mm male to 6an male fitting > 6an female 90 degree elbow fitting to 6 anpress fit hose (3/8) > hose to oil cooler fitting 6an female > 6an male to 16 mm X 1.5 adapter fitting into oil cooler> outlet of oil cooler is same fitting as inlet> 6an female to hose> to 6an female
at bracket for 1/8 npt pressure gauge> bracket is inlet/outlet 6an male > outlet is 6an female to hose> hose to upper diff housing> 6an female to
90degree 6an male/1/8 npt male at diff housing.

(Tap used for all three holes in diff was 1/8 npt.)